Un composant essentiel de l'habitacle de votre véhicule est le rétroviseur. Il vous permet de voir les voitures et les objets derrière vous lorsque vous conduisez. Le miroir est généralement monté sur le pare-brise sur un socle ou un support, et il nécessite un adhésif à collage rapide pour rester en place. Consultez notre guide de colle de rétroviseur pour trouver le meilleur adhésif pour le travail.
Meilleur dans l'ensembleAdhésif pour rétroviseur Versachem
Vérifier le dernier résumé des prixCe kit en deux parties comprend un adhésif facile à utiliser, idéal pour coller le métal au verre. Il ne faut que 30 minutes ou moins pour remonter votre miroir sur son support
AvantagesKit d'adhésif Permatex Extreme pour rétroviseur de force professionnelle
Vérifier le dernier résumé des prixCe kit de qualité professionnelle est livré avec un adhésif et un activateur. Il s'agit de la même formule spécifiée par l'OEM que celle utilisée sur les modèles Ford, Chrysler et GM.
AvantagesAdhésif pour rétroviseur 3M
Vérifier le dernier résumé des prixCe kit d'adhésif et d'apprêt en deux parties durcit en 60 minutes et prend 24 heures pour durcir. Il peut être appliqué à des températures allant de zéro à 175 degrés Fahrenheit.
AvantagesPresque tous les kits de rétroviseurs sont des systèmes en deux parties qui comprennent à la fois un adhésif et un activateur. L'activateur accélère la manipulation et la prise du produit, et généralement vous obtiendrez de meilleurs résultats si vous appliquez l'activateur avant d'utiliser l'adhésif. Gardez à l'esprit que l'adhésif et l'activateur peuvent irriter la peau et les yeux.
3M a commencé comme une entreprise minière à petite échelle dans le nord du Minnesota il y a plus d'un siècle, en 1902. L'entreprise opère dans 70 pays et fabrique plus de 60 000 produits. Un produit populaire est l'adhésif pour rétroviseur 3M.
WORKTECH, basée à Chino, en Californie, fabrique des produits chimiques sur les marchés OEM et ODM depuis 1992. La société fabrique des fabricants de joints, des produits d'étanchéité, des freins filetés, des adhésifs et des kits de réparation. L'un des meilleurs produits est la réparation professionnelle des adhésifs et scellants de rétroviseur WORKTECH.
Permatex, fondée en 1909 et basée à Hartford, dans le Connecticut, fabrique des produits chimiques haut de gamme pour l'entretien et la réparation automobiles ainsi que pour les marchés de la maison et de la quincaillerie. Les produits comprennent des fabricants de joints, des produits d'étanchéité, des nettoyants pour les mains, des freins filetés, des adhésifs, des nettoyants, des kits de réparation et des lubrifiants. Un produit recommandé est le kit d'adhésif Permatex Extreme pour rétroviseur de force professionnelle.
Pro Seal Automotive Products est sous l'égide de Super Glue Corporation, qui a fait ses débuts avec des kits d'avions de loisirs. Les cyanoacrylates (le nom chimique de la colle) ont été commercialisés pour la première fois en 1958. La société est basée à Ontario, en Californie, et produit divers matériaux de liaison, y compris des adhésifs techniques haute performance en plus de la super colle. L'un des meilleurs produits est l'adhésif instantané Pro Seal.
VersaChem fabrique des solutions avancées d'adhésifs, d'étanchéité et de réparation automobile depuis plus de 35 ans. L'entreprise produit des seringues auto-mélangeuses, des tubes de distribution, des buses de contrôle, des bombes aérosols, des cartouches, des bâtonnets et des kits de réparation tout compris. L'adhésif pour rétroviseur Versachem est l'un des meilleurs produits.
Le meilleur adhésif pour rétroviseurs sera résistant à la chaleur. Le pare-brise d'un véhicule peut devenir très chaud et est fréquemment exposé à la lumière du soleil pendant que vous conduisez et lorsque vous garez la voiture pendant de longues périodes. Si la colle ne colle pas solidement le miroir au verre, il peut se séparer du pare-brise. De plus, la colle doit être résistante aux vibrations sur les routes cahoteuses et maintenir sa forte adhérence dans des conditions humides.
Le kit de rétroviseur VersaChem est un adhésif en deux parties facile à utiliser qui fixe en permanence votre rétroviseur au pare-brise. Il est idéal pour coller du métal au verre et il ne faut que 30 minutes ou moins pour remonter votre miroir sur son support. Il ne nécessite qu'une goutte ou un petit cordon d'adhésif pour l'application.
Dès que vous fixez le bouton avec l'adhésif sur le pare-brise, il colle immédiatement et fermement. Cela ne prend qu'une minute à régler, et après s'être assis toute la nuit, le bouton est solide comme un roc. Le miroir reste en place pendant les journées très chaudes et les nuits sous le point de congélation, et il résiste aux heures de basses lourdes et percutantes de vos subwoofers. Il résiste également aux vibrations, aux chocs et aux turbulences de la conduite d'une Jeep. You can adjust the mirror without worrying about peeling it off the windshield mount, and the directions are easy to follow.
Some have reported that the base of the mirror doesn't bond to the windshield, the glue doesn't harden, and the adhesive fails within a short period of time. There may also be problems if the bonding surface is plastic. The instructions don't indicate how to properly apply the primer, and it requires you to remain absolutely stationary during mounting, which can be very difficult.
This two-part kit features a professional-strength adhesive and activator. The medical-grade towelette helps with application accuracy. It provides the same strength as Original Equipment Manufacturer (OEM) products used by Ford, Chrysler, and GM and results in a permanent bond.
This product works very well as long as you follow the instructions, which are clear and straightforward. The adhesive is simple to use, is very powerful, and is long-lasting. It's also a very good value and much less expensive than some rival brands. It keeps your mirror on in hot temperatures and in direct sunlight.
However, you must follow the directions exactly or it may not work. Your window and mounting surfaces must also be extremely clean. Some users have also complained that the product fails after a short period of use.
The 3M rear view mirror adhesive and primer is a two-part system that permanently bonds a rear view mirror bracket to the windshield glass. It begins to harden in 60 minutes and takes 24 hours to completely cure. It can be applied in temperatures ranging from zero to 175 degrees Fahrenheit.
The adhesive firmly and quickly attaches your mirror to the windshield, and it holds tight after a prolonged period of time. The instructions are easy to follow, and it's set and cured within a day. It continues to adhere when exposed to hot temperatures, and there is enough adhesive in the package to apply it three times. It also bonds metal to plastic.
Some have reported that the adhesive doesn't provide a good seal between the mirror button and the glass, causing failure. Also, you may need to use more glue than is recommended to ensure the mirror stays put. In addition, positioning the mirror may be difficult if you don't get it on the first try.
This clear epoxy is another great product from Permatex. It comes with a two-part dispensing syringe that sets in five minutes. It is water- and solvent-resistant, making it easier to apply across multiple jobs. While this is great to fix your rear view mirror problem, you can also continue to use it for your other projects.
It can also bond ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal, and rubber. It is very cheap, so you don’t get a whole lot of product. But you don’t need much for the type of fine detail jobs you will use this for. When bonding a rear view mirror, five minutes is a lot of time to hold something in place, so be sure you are prepared. It is another 10 minutes before what you bonded is safe to handle and then 24 hours for a full cure to reach its top strength.
You do have to mix together the resin and hardener, which can be a dangerous process if not handled properly. Despite the detailed process for this, if done correctly, it is highly effective.
While more expensive than other products, this super epoxy from PC Products is definitely of a higher quality. It can be used on your rear view mirror as well as other projects involving wood, metal, glass, brick, concrete, and fiberglass. It cures translucently, so it won’t be noticed.
It is also highly temperature-resistant, ensuring it will have a long life and your fix won’t fall apart. It bonds so well that you can even drill, sand, saw, and paint after it’s fully cured. The product comes with two syringes to apply the epoxy.
You will have to do some mixing of the product, so be very careful when handling this super epoxy. It can take it up to 24 hours to fully cure, depending on your project. For the rear view mirror, you are looking at a three to four hour cure time. While a bit more expensive than other products, it is still under $20 and not a big purchase.
This product from JB Weld is cheap, but you don’t end up losing on quality. Coming in various sizes, this is a 3900 PSI strength Epoxy that sets within five minutes and cures within one hour. It dries clear and can be used on tile, most plastics, ceramic, glass, and wood.
It is a two-part epoxy that you must, like the ones before, mix yourself. It is great for both large and small jobs, so no matter the size of your rearview mirror, you should have no trouble setting it.
It does take five minutes to set, so you will have to hold the mirror during that time or the attachment that goes on your windshield. The product itself likely doesn’t last over a year and will dry up. There are some reports of it not working too well on certain jobs or materials. Of course, the dispensing and mixing of the epoxy is a critical step, so ensure you get it right to get a long-lasting job.
Gorilla is well-known in the world of glue products. This two-part epoxy could be the perfect solution for your rear view mirror issue. Just like other epoxy products, you must mix the liquids in equal parts and then apply, so be very careful. It is great across multiple surfaces, dries clear, and is solvent-resistant.
It typically sets within five minutes, but cure time can depend upon your project. It is also water-resistant, giving you peace of mind that it will last a long time. The product design keeps the resin and hardener separate so it won’t dry out over time.
You likely won’t have to worry about a faulty product with Gorilla. You can also get this product in an epoxy stick if you don’t want to worry about the detailed—and often smelly—mixing. Sometimes it can take days to fully harden, so you will need to be careful until then. It also sets very quickly, so be sure you are confident when you place the pieces together.
The Loctite Rearview Mirror Adhesive is designed specifically to secure a rear view mirror bracket to a windshield. GM, Ford, and Daimler-Chrysler use this adhesive, which comes in a small tube with an activator. The product takes just 15 minutes to cure, after which the bracket can be safely handled. The glue will permanently bond the mirror to the windshield.
This product works well as long as you follow the directions. You don't need to use much of the adhesive for it to be effective, and users report that the mirror stays on nice and tight following application. The mirror should stay in place even during a heatwave and in humid conditions.
However, some users had to do two applications to make their mirrors stick properly to the windshield. Also, some substance may squeeze out over the edges, which you may want to scrape off for aesthetic purposes
Rear view mirror glue contains compounds that are resistant to heat, moisture, vibrations, chemicals, and impact. Super glue, while fast-acting, does not have the same properties to resist heat, moisture, etc.
It depends on the brand of glue you use, but in general it takes between one and 120 seconds for handling, five to 60 minutes for curing, and at least 24 hours to obtain maximum tensile strength.
Remove the old glue from the mirror and the glass. Use a solvent to clean the glass. In older vehicles, the mirror may attach directly to the windshield. In newer models, you need to remove the metal button from the mirror assembly. Apply adhesive to the mounting button and press it onto the glass. Hold the button in place as long as the directions specify. Wait the designated time before reinstalling the mirror on the button.
It depends on the brand. Some glue does a good job of bonding plastic to plastic or plastic to metal and can be used for other various purposes. Others work best bonding metal to glass.
Our pick for the best rear view mirror glue is the Versachem Rear View Mirror Adhesive. It takes just 30 minutes or less to remount your mirror to its bracket, and it sticks immediately and firmly. The mirror stays in place during fluctuating temperatures, and the directions are easy to follow.
For a less expensive option, consider the Permatex Extreme Rearview Mirror Professional Strength Adhesive Kit.
